The Sony HVL-F60RM2 is a versatile, high power flash for creative photography and video shooting.
Improved algorithms and stable light emission in conjunction with the camera body offer great wireless flash performance.
Enjoy easy operability with this radio controlled flash, enabling various shooting styles and a stable, consistent high GN60 output.
Up to 200 consecutive flashes at 10 frames per second is possible and sync at shutter speeds up to 1/400 sec. with this Sony flash.
Intelligent communication with the latest Sony α bodies
The HVL-F60RM2 can communicate with Sony α camera bodies to deliver consistent GN60 light output at every flash. It supports focal lengths
from 20mm (14mm with the wide panel) to 200mm.
Up to 20 flashes per second
With the electronic shutter on a compatible camera, up to approx. 20 flashes per second can be produced continuously
for more than 1 second. The FA-EBA1 external flash battery (not supplied) allows approx.
20 flashes per second for more than 10 seconds.
High-speed continuous flash shooting
With a compatible camera the HVL-F60RM2 can continuously provide flash for up to 200 frames in high-speed bursts at up to 10fps.
Missed frames dues to flash sync failure are avoided, providing stable continuous shooting support.
Minimal flash trigger time lag
When using the HVL-F60RM2 in combination with a compatible camera, time lag between pressing the shutter button and
flash output is significantly reduced5 so that fleeting moments can be captured with confidence.
Flash control linked to camera face detection
With a compatible camera, white balance is automatically adjusted so that the subject’s face is rendered with natural colour. The HVL-F60RM2 works with a compatible
camera face detection to provide ideal lighting for the main subject, even in groups.
Per-frame P-TTL flash control adapts to changing light
High-speed control sequencing in the camera uses pre-flash to control each individual flash during continuous bursts,
even when tracking fast-moving subjects in scenes where the light changes dramatically.
Fast recycle and high-speed continuous flash
Advanced electronics and construction contribute to fast recycle times and allow continuous flash shooting for extended periods of time.
A set of four batteries can provide power for more than 240 flashes with 1.7 second recycle time. The optional FA-EBA1 external
flash battery adapter can be used to provide recycle times as fast as 0.6 seconds.
High-speed, slow, and rear-curtain sync
High-speed sync works at all shutter speeds and can be used with the aperture wide open to produce beautiful background bokeh for portraits.
Slow sync and rear-curtain sync are also supported.
Light output optimised for focal length and image size
Flash illumination angle is automatically adjusted to match the focal length of the lens used over a 20-200mm range.
Light distribution is also adjusted for optimum illumination with full-frame or APS-C format.
Fast angle adjustment with Quick Shift Bounce
Quickly angle the flash head 90 degrees to the left or right, 150 degrees up, or 8 degrees down, and rapidly switch
between horizontal and vertical orientation. A revised mechanism is more compact and convenient.
Enhanced dust and moisture resistance with metal shoe foot
A dust and moisture resistant design17 contributes to high reliability in outdoor conditions.
Shoe sealing achieves even greater dust and moisture resistance with certain a series bodies.
A metal shoe foot with rugged side frame significantly
increases the strength and durability of the Multi Interface Shoe and its electrical contacts.
Improved rear-panel Quick Navi display
Pressing the Fn button causes the selected flash mode and other parameters to appear on the display for easy setup in a variety of
shooting situations. While the previous HVL-F60RM flash only displayed the Wireless OFF and Memory Recall OFF icons
when the Fn button was pressed, these parameters are normally visible on the HVL-F60RM2 display.
Wireless radio control for up to 15 flash units
Control up to 15 flash and/or receiver units in 5 groups. HVL-F60RM2 can communicate with flash units that do not feature
wireless radio communication via the optional FA-WRC1M commander and/or FA-WRR1 receiver.
MFR ref: HVL-F60RM2
Jessops Speedlight Flash Workshop